Votre Forum

Identifiez-vous avec le pseudo d'administration pour configurer et personaliser votre forum.

Vous n'êtes pas identifié.

#1 16-12-2019 02:02:39

Nouveau membre
Date d'inscription: 10-12-2019
Messages: 2

Depending on the level of privacy you need

"We have produced a variety of cafe doors for both public and private use.   Interested in cafe doors?   Consider the following when designing your doors.

Fixed louvers– typically, all cafe door louvers are fixed.  The purpose of these doors is to obscure the view from one area into another and provide easy access, making fixed louvers a natural.  If you prefer the look of a tilt rod, it can be ordered as such.  You may want to tighten the louver tension so that the louvers are not moved unless that is your intention.

Design– the top of the cafe door can be a simple rectangular top, slightly curved or elaborately designed.  See example photos below or submit your own unique design.

Proportion- as with all our custom shutters, cafe doors are built to order.  Depending on the level of privacy you need, cafe doors are usually between 3′-5′ high, possibly higher.    A good rule of thumb is to take your opening height and order your shutters 1/2 to 2/3 the total height.  Also pay attention to where you want them positioned.  Are you taller than average?  You may want to hinge them higher to obstruct your site line.

Hardware- cafe doors must be installed with cafe door pivot hardware.  Unlike a standard hinge that allows 90 degree access, the pivot hardware allows the shutter to rotate a full 180 degrees.  For a commercial application, bommer hinges are recommended.  These are spring loaded hinges that swing the door back into the closed position after being pushed open.  (Please note, width deductions taken on cafe style openings are more than a standard shutter panel.  This is necessary for the hardware to operate properly and allow the shutter to swing correctly.)

Installation- Solid wood jambs are the ideal surface to install your cafe doors. If you have only a drywall opening, don’t despair.  Order your cafe doors with mounting strips.  These square four sided wood strips can be secured to your jamb and through a stud and provide the pivot hardware a solid surface on which to mount."

"Tuscan interiors are very popular in the US right now.  A new book, Italian Rustic, written by Elizabeth Minchilli, details a variety of authentic Tuscan homes.    From wall finishes, to flooring, to windows and even shutters, she discusses the construction methods and how you can replicate this look in your home.

On my recent trip to Italy, I was intrigued with the shutters that are so common on the inside and outside of a Tuscan home.   According to Elizabeth, Italians have an intricate system for setting windows and wholesale Plantation shutters.     Interior shutters, called Scuri’s, are primarily designed to provide darkness.  Notice how in the photo from her book, the shutter itself is designed to fit snugly in the jamb area of the glass with a bit of overlap, insuring maximum darkness when closed. http://www.chinagoodwood.com

Hors ligne


Pied de page des forums